Introduction to the performance advantages of mild steel shot

Release time:

2024-04-29

Low carbon steel shot, also known as low Bay steel shot, as the name suggests is a very low carbon content of steel shot, generally carbon content of 0.2% or less.

Introduction to the performance advantages of mild steel shot

Low carbon steel shot, also known as low Bay steel shot, as the name suggests is a very low carbon content of steel shot, generally carbon content of 0.2% or less.

Low carbon steel shot because of low carbon C content, and contains some rare metals such as silicon Si, manganese Mn, etc. So low carbon steel shot fatigue resistance is better than high carbon steel shot, and because of the deoxidation process, the formation of a low carbon stable internal composition, good toughness, good hardness, good rebound effect.

Low carbon steel shot raw materials are generally used low carbon high silicon steel, low carbon steel plate and then add a little ferromanganese, ferrosilicon, ferrochrome.

Low carbon steel shot production process and high carbon steel shot process is more or less the same, but some of the details are different, low carbon steel shot production process first steelmaking, and then tempering, and then centrifugal casting into the shot, into the shot after drying, sieving, sieving, and then quenching to enhance the hardness, and then surface treatment, and then heat treatment and tempering to further improve the performance, and finally subdivided.

Mild steel shot is mainly used for precision casting shot blasting, spring, gear shot blasting, steel mill steel plate pretreatment process.

Low carbon steel shot performance is very high, high carbon steel shot in the shot blasting often appear broken phenomenon, and low carbon steel shot rarely appear this situation, so low carbon steel shot although the price is higher than the high carbon steel shot high, but the use of time to be much longer than the high carbon steel shot, the comprehensive cost-effective is very high.

2024-04-29

Selection of steel shot and steel grit and the difference between shot blasting, sand blasting and shot peening

2024-04-29

Introduction to the performance advantages of mild steel shot

2024-04-29

Trivia about steel shot and steel grit: the difference between shot peening, shot peening, and sandblasting surface treatment

2024-04-29

Influence of steel shot size on blast cleaning efficiency and surface roughness of castings

2024-04-29

What are the main uses of steel shot?

2024-04-29